Dropping your iPhone 13 in water can be a nightmare. Whether you accidentally dropped it in the sink, toilet, pool, or even the ocean, the impact can be devastating. Although iPhones are designed to be fairly waterproof, exposing them to liquid can still cause serious damage. It’s important to act quickly and take the right steps to minimize the damage.
Turn off your iPhone 13
The first thing you should do is turn off your iPhone 13. This will help prevent it from short-circuiting and further damage. If your iPhone 13 is still powered on, press and hold the power button until it turns off. If it doesn’t turn off, try a hard reset by pressing and holding both the power and volume down buttons for at least 10 seconds.
Remove all cables and accessories
If your iPhone 13 was connected to any cables or accessories when it dropped in water, you should remove them as soon as possible. This includes power cables, headphones, and other wireless accessories. Removing them will help avoid any short-circuiting and further damage.
Take out the SIM card
The next step is to take out the SIM card. Depending on the type of iPhone 13, you may need to use a paperclip or SIM card removal tool to open the SIM card slot. Once open, remove the SIM card and put it in a dry, safe place. This will help avoid any water damage to the SIM card.
Dry the iPhone 13
Once you’ve removed the SIM card and turned off the iPhone 13, it’s time to dry it. Start by using a cloth or paper towel to dry off any visible water. Make sure to get into all the nooks and crannies, such as the headphone jack and charging port. Once you’ve wiped off the visible water, you can use a vacuum cleaner with a soft brush attachment to get into any hard-to-reach spots.
Place the iPhone 13 in a sealed bag of rice
Once the iPhone 13 is dry, you should place it in a sealed bag of uncooked rice. The rice will absorb any remaining moisture inside the device. Make sure the entire device is covered in rice and leave it in the bag for at least 24 hours. After 24 hours, take the iPhone 13 out of the bag and check that it’s completely dry.
Replace any damaged parts
If any parts of your iPhone 13 were damaged in the water, you should replace them as soon as possible. This includes the battery, charging port, and speakers. You can purchase replacement parts online or from your local Apple store.
Check for water damage
Once all the parts have been replaced, you should check for water damage. If there’s any visible damage, such as corrosion or discoloration, you should take your iPhone 13 to a repair shop for further inspection. The repair shop can check for any hidden damage and make sure your iPhone 13 is safe to use.
Power on the iPhone 13
Once you’ve checked for water damage, it’s time to power on the iPhone 13. Connect the device to a power source and press the power button to see if it turns on. If the iPhone 13 powers on, you should back up any important data as soon as possible. You can do this by connecting the device to a computer and using iTunes or iCloud.
Dropping your iPhone 13 in water can be a nightmare, but there are steps you can take to minimize the damage. It’s important to act quickly and take the correct steps to ensure the device is safe to use. Turn off the iPhone 13, remove the SIM card and any cables or accessories, dry it thoroughly, and place it in a sealed bag of uncooked rice. You should also replace any damaged parts and check for water damage before powering on the device. If everything looks good, you can back up any important data and continue using your iPhone 13.
